Newmarket - 09 3750007 - 1/12A Clayton Street
Penrose - 09 2180007 - 282 Church Street

For cleaning and flushing out the oil circuits of gasoline and diesel engines. 300 ml sufficient for up to 6 l of motor oil. Not suitable for use on motorbikes with wet clutches!

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.

Content 300 ml
Application One 300 ml can is sufficient for up to 6 liters of oil.
Add Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. 
Engine Flush is compatible with all commercially available motor oils.
Package Unit 20
Pallet Unit 1960
Additive Type Oil-Additives

Causes serious eye irritation, May be fatal if swallowed and enters airways, May cause an allergic skin reaction, Repeated exposure may cause skin dryness or cracking

Translation missing: